DIY Air Conditioner Maintenance

Taking care of your air conditioner unit is important to keep your family comfortable. Summer temperatures can reach triple digits in some places making it very important that your air conditioning system is ready to face those high temperatures. When you have performed regular maintenance on your air conditioner, it can perform as you need it to.

While we here at Anderson will gladly perform your annual maintenance, there are a few simple DIY air conditioner maintenance tasks you can do at home to help your air conditioning unit perform as it should. These simple steps can help make a difference in whether you’re home stays cool or you have problems this summer.

Change Filters

One of the simplest and most forgotten steps of DIY air conditioner maintenance is to change out the air filters on a regular basis. This simple step helps your system run more efficiently and helps you breathe easier.

This is your first line of defense against pollution in your indoor air. By changing out the filter on a regular basis you can prevent the allergens from floating around your home. It also helps your air conditioner system run easier as when the filters are blocked the system has to work harder to cool your home.

Clean Condenser

When you’re working outside make sure to clean out around your unit. Check your outdoor unit and clean out debris, dirt, sticks and leaves from around the unit. When these items surround the unit it is hard to get the necessary air it needs to cool your home. This makes the unit work harder than it should have to. This DIY air conditioner maintenance task does not need any technology and can be part of your gardening tasks.

Rinse Off Unit

You can easily rinse off the condenser unit and the condenser coils by turning off the unit and spraying it down. Be sure you take that step to turn off the power to the unit so you are safe during this clean up. Again this This DIY air conditioner maintenance is simple to do.

Supply Grills

Don’t forget to check around the supply grills in your home. This is where your air conditioning system sends your cold air into the home. You want to make sure they are cleaned off and not blocked by rugs or anything similar. You need to clean around them if there’s any dust or debris on the ceiling or the grills themselves. This will help to keep the dust and dirt blown around your home down to a minimum.

This DIY air conditioner maintenance task is also simple to undertake, but may need a few tools. All the tools such as brushes or air blowers are all available in any hardware shop.

HVAC Maintenance

While there are plenty of DIY air conditioner maintenance steps you can do at your home to make sure your system runs smoothly, calling in a professional for air conditioning maintenance is also advised. Our team here at Anderson can assist you with more detailed inspections and cleaning of the unit on items such as the evaporator coils, and testing the lines. This is important to have done annually to make sure your air conditioning system is at its peak efficiency at all times.

As you can see there are several This DIY air conditioner maintenance tasks you can do at home that are simple steps in keeping your air conditioner system running smoothly. These steps may not seem like much at first but they can mean the difference in a comfortable home and one that the system is struggling to keep up. Debris and dirt can wreak havoc on the system when it’s causing it to work harder than it should have to.

Keep the areas around the outside unit clean and free of debris. Always remember to change out the air filters to give your system a fresh start each month. Keep an eye on the supply grates to make sure they are not blocked by items in your home or that they are not dirty and dusty.

Duct Sealing To Keep Bugs And Rodents Out

Overview

Male hispanic air-conditioning maintenance technicianDuct sealing is one of the ways of getting rid of bugs and rodents. Rats, mice, cockroaches and other bugs/ rodents species use air vents/ ducts and dark, rarely used places as their transit highways or dwelling places. In addition to spreading diseases, these bugs and rodents can cause massive damage to clothes, electrical wiring and other properties. The good news is that you can rid of them.

How to carry out duct sealing

Open and clean vents

Duct sealing is a comprehensive process that entails several processes, equipments and products. A physical check of your vents is a good start. Open vents by removing the materials/ objects at the openings of the vents. Ensure your air conditioner or heater is off before you open the vents or touch any parts. Clean the insides of your vents by blowing, sweeping or scrubbing food and other particles that attract the rodents and bugs.

Set traps and seal vents

There are many mechanical traps you can set for rodents. Set as many as you can inside the vents, preferably at the entrance. You can add bait to the traps to attract the bugs and rodents. Close the vent openings and any other gaps that may be entry points for the rodents and bugs.

Caution

Since you will leave the traps in place, avoid using high quantities of foods or chemicals. Food might rot and start smelling before you catch the rodents, and some chemicals might be blown into your living spaces; poisoning you. Poisons that do not kill on impact might cause the rodents to die elsewhere; making them hard to remove.

Remove traps and reseal the vents

After some time, reopen the vents and remove the traps together with any dead rodents/ bugs. Return the traps if you still think there are more rodents/ bugs. Seal the ducts and other gaps to prevent future invasion. A fine wire mesh might do the trick.

Conclusion

You can keep rodents and bugs out of your home through duct sealing. Some of the things needed for effective duct sealing include screwdrivers (for opening vent entries), safety gloves, traps, baits, fine wire mesh, torch, soap and plastic bags for disposing off the dead rodents/ bugs. Call us for all your air conditioning and heating system needs.